Product Description
Seamless Steel Pipe has hollow section, widely used for conveying fluid pipeline, such as conveying oil, natural gas, gas, water and some solid materials, etc. Compared with solid steel such as Round Steel, Steel Pipe is a kind of economic section steel because of its light weight and the same bending and torsional strength.
It is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipe, automobile transmission shaft, bicycle frame and steel scaffolding used in construction. It can improve the utilization rate of materials, simplify the manufacturing process, save materials and processing hours, and has been widely used in the manufacture of steel pipe.
Product Specification
Name | Seamless Steel Tube |
Length | MAX 18000 |
OD | 6.0-114.0mm |
Delivery Condition | Annealed, Normalized, Normalized and Tempered |
Surface treatment | Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting |
Application | For high, middle, low pressure boiler and pressure purpose. Used in heat exchangers and boilers to provide highly energy efficient means of heat transfer. The presence of the internal rifling induces centrifugal forces in the mass flow thereby separating the water from the steam fraction and forcing the water towards the tube wall. |
Standard & Grade | ASTM, ASME, A/SA 192, 209, 210 and 213 specifications and all associated grades. EN 10216, DN 17175, BS 3059, JIS 3461 – 3462 |
Approvals | ISMT is ISO 14001, ISO/TS 16949:2002, and OHSAS 18001 approved. In addition we hold approvals from all major national and international official authorities, customers, and third party certification agencies. |
Grade and Mechanical Properties: |
C(Max) | Mn | Si(Min) | P(Max) | S(Max) |
0.35 | 0.29-1.06 | 0.10 | 0.035 | 0.035 |
Grade and Chemical composition: | |
Grade | Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation (%) | |
C | ≥ 485 | ≥ 275 | ≥ 30 | |
We offer different modes of transport depending on the customer's destination: rail transport and ship transport,etc.The Shipping Mark shall consist of: Trade mark, Seller's name, Product name, Applicable standards,Specifications, Package No., Contract No., Heat No., Production date, Weighing method, Net weight, Gross Weight, Consignee and Protection symbols, etc.
Product Display
Packaging And Transportation
FAQ
1.Why you choose us ?
Our company has been 12 years. We control the quality of the products very strictly, there are special people for the quality.
If you got lower price from other supplier ,we will pay back twice to customers about the higher price.
2.How long is your delivery time?
According to the quantity.Generally within 2-7 days if in stock.And 15-20 days if not in stock.
3.What is your payment terms?
A: By T/T 30% in advance ,and 70% before delivery.
B:100% L/C at sight.
C:By T/T 30% in advance,and 70% L/C at sight.
4.Do you provide samples ? Is it free?
Yes, we offer the sample for free but do not pay for the cost of freight.
5.What if the customer is not satisfied?
If there is a problem with the product,we take full responsibility.
If there is a problem in the transportation process,we will help you to solve it.