Product Description
Seamless carbon steel pipes are made of steel ingots or solid billets through perforation to make capillaries, which are then hot-rolled, cold-rolled or cold-drawn. Seamless Carbon steel pipe plays an important role in my country's Steel Pipe industry. According to incomplete statistics, there are more than 240 seamless carbon steel pipe manufacturers in my country, more than 250 sets of seamless carbon steel pipe units, and an annual production capacity of about 4.5 million tons. From the perspective of diameter, <φ76, accounting for 35%, <φ159-650, accounting for 25%. In terms of varieties, general-purpose pipes are 1.9 million tons, accounting for 54%; oil pipes are 760,000 tons, accounting for 5.7%; hydraulic struts and precision pipes are 150,000 tons, accounting for 4.3%; stainless pipes, bearing pipes, and automobile pipes total 50,000 tons. tons, accounting for 1.4%.
The raw material of seamless carbon steel pipe is a round tube blank, which is cut by a cutting machine into a billet with a length of about 1 meter, and sent to a furnace for heating through a conveyor belt. The billets are fed into the furnace and heated at about 1200 degrees Celsius. The fuel is hydrogen or acetylene. Furnace temperature control is a critical issue. After the round tube blank is released from the furnace, it is pierced through a pressure punching machine. Generally, the more common punching machine is the conical roller punching machine. This kind of punching machine has high production efficiency, good product quality, large amount of perforation and diameter expansion, and can wear a variety of steel grades. After perforation, the round tube blank is successively cross-rolled, continuously rolled or extruded by three rolls.
Product Specification
Product | SEAMLESS / ERW / SAW ALLOY STEEL PIPE |
Dimension | 6 mm - 1080 mm |
Thickness | 1mm - 135 mm |
Length | 3 m - 12 m or according to the requirements of clients |
Standard | ASTM GB DIN |
Steel grade | A106/53/179/214/192/210 A/B/C ST37.2/35.4/35.8/52/52.3/52.4/42/45 10# 20# 45# P2, P12, P11, P22, P5, P9, P91 T2, T11,T5,T9,T22, 4140, 12CrMo, 15CrMo, 12Cr2Mo, 1Cr5Mo, 2CrMo4, 1Cr9Mo, 10CrMo910, etc. |
Trade terms | FOB/CIF/CFR |
Payment terms | T/T, L/C |
Delivery port | Tianjin, China |
Delivery time | 10 or according to the real quantity of the tubes |
Surface treatment | Black painting Varnish painting 3PE Hot galvanized or other coating according to your requirements Bare tube |
End of tubes | Beveled, plain, thread, plastic caps |
Inspection | Ultrasonic examination, eddy inspection, hydrosttic testing etc. |
Package | Bundles, lossen or according to your requirements |
Certificate | API 5L/5CT, ISO, PED etc. |
Technical data
Chemical Composition
C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
0.05-0.15 | 0.30-0.60 | 0.025 max | 0.025 max | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
Mechanical Properties
Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
415 min | 205 min | 30 min |
Outside Diameter & Tolerance
ASTM A450 | Hot rolled | Outside Diameter, mm | Tolerance, mm |
OD≤101.6 | +0.4/-0.8 |
101.6<OD≤190.5 | +0.4/-1.2 |
190.5<OD≤228.6 | +0.4/-1.6 |
Cold Drawn | Outside Diameter, mm | Tolerance, mm |
OD<25.4 | ±0.10 |
25.4≤OD≤38.1 | ±0.15 |
38.1<OD<50.8 | ±0.20 |
50.8≤OD<63.5 | ±0.25 |
63.5≤OD<76.2 | ±0.30 |
76.2≤OD≤101.6 | ±0.38 |
101.6<OD≤190.5 | +0.38/-0.64 |
190.5<OD≤228.6 | +0.38/-1.14 |
ASTM A530 & ASTM A335 | NPS | Outside Diameter, inch | Tolerance, mm |
1/8≤OD≤1-1/2 | ±0.40 |
1-1/2<OD≤4 | ±0.79 |
4<OD≤8 | +1.59/-0.79 |
8<OD≤12 | +2.38/-0.79 |
OD>12 | ±1% |
Wall thickness & Tolerance
ASTM A450 | Hot rolled | Outside Diameter, mm | Tolerance, % |
OD≤101.6, WT≤2.4 | +40/-0 |
OD≤101.6, 2.4<WT≤3.8 | +35/-0 |
OD≤101.6, 3.8<WT≤4.6 | +33/-0 |
OD≤101.6, WT>4.6 | +28/-0 |
OD>101.6, 2.4<WT≤3.8 | +35/-0 |
OD>101.6, 3.8<WT≤4.6 | +33/-0 |
OD>101.6, WT>4.6 | +28/-0 |
Cold Drawn | Outside Diameter, mm | Tolerance, % |
OD≤38.1 | +20/-0 |
OD>38.1 | +22/-0 |
ASTM A530 | NPS | Outside Diameter, inch | Tolerance, % |
1/8≤OD≤2-1/2 | +20.0/-12.5 |
3≤OD≤18, WT/OD≤5% | +22.5/-12.5 |
3≤OD≤18, WT/OD>5% | +15.0/-12.5 |
OD≥20, WT/OD≤5% | +22.5/-12.5 |
OD≥20, WT/OD>5% | +15.0/-12.5 |
Product Display
Packaging And Transportation
FAQ
1.Why you choose us?
Our company has been 12 years. We control the quality of the products very strictly, there are special people for the quality.
If you got lower price from other supplier, we will pay back twice to customers about the higher price.
2.How long is your delivery time?
According to the quantity. Generally within 2-7 days if in stock. And 15-20 days if not in stock.
3.What is your payment terms?
A: By T/T 30% in advance, and 70% before delivery.
B:100% L/C at sight.
C:By T/T 30% in advance,and 70% L/C at sight.
4.Do you provide samples ? Is it free?
Yes, we offer the sample for free but do not pay for the cost of freight.
5.What if the customer is not satisfied?
If there is a problem with the product,we take full responsibility.
If there is a problem in the transportation process,we will help you to solve it.